Upgrade your truck driving skills with our HR licence Gold Coast training! We are your trusted partner for skills, knowledge, and the confidence to get behind the wheel of any truck.
WHAT CAN I DRIVE?
GVM greater than 8T. Any towed trailer must not weigh greater than 9T GVM.
WHAT CAN I DRIVE?
GVM greater than 8T. Any towed trailer must not weigh greater than 9T GVM.
With a heavy rigid truck licence, you can drive trucks or vehicles with over 8T GVM and 3 or more axles. We provide one-on-one HR truck licence training anywhere on the Gold Coast, Brisbane, Tweed Heads, Murwillumbah, QLD, and NSW.
With our HR licence training, you can drive a wide range of heavy vehicles. It is important to note that, if you have a manual car licence and you want to obtain a condition B (synchromesh) licence, you can complete the test using an automatic vehicle. Completing your licence upgrade in an automatic vehicle makes it easier to obtain a hr licence.
Moreover, if you have an automatic car licence and want to upgrade to an HR driver’s licence, you should consider taking a test in our Heavy Rigid Synchromesh Truck. Once you complete your test with our manual trucks, you will acquire a manual car licence.
HR Condition B
A licence allowing you to drive synchromesh and automatic gearbox trucks.
HR Unrestricted
This license allows you to drive trucks with any gearbox including Non Synchromesh gearboxes such as an 18 Speed Road Ranger where you have to double the clutch.
There are three vehicle options in conducting your lessons and test, which vehicle you choose will depend on your current licence conditions as well as the vehicles you intend to drive.
If you are unsure of which vehicle you want to conduct your truck training, don’t hesitate to give us a call or visit our contact us page and we will help you decide which solution is best for you.
Our Heavy Rigid Automatic Trucks have Allison Automatic gearboxes. These Automatic gearboxes operate just like Automatic car gearbox.
If you have a manual car licence and you complete your Heavy Rigid Licence in an Automatic truck you will still obtain an HR Condition B Licence allowing you to drive a Synchromesh Gearbox Truck and an Automatic Truck.
If you hold an Automatic car licence and you pass your test in an Automatic truck you will obtain an Automatic truck licence.
Our Heavy Rigid Synchromesh Truck has a 6-speed Synchromesh gearbox. A synchromesh gearbox is the same style that you find in manual cars. If you are used to a manual car you should have no problems changing gears in this truck.
On passing your licence test in this vehicle you will have an HR Condition B licence allowing you to drive a Synchromesh Gearbox Truck and an Automatic Truck.
Our Heavy Rigid Road Ranger Trucks either have an 18-speed overdrive crash/road ranger gearbox or a 15-speed deep reduction crash/road ranger gearbox. These will require doubling the clutch on both up and down changes of gear as well as matching the revs.
On passing your licence test in this vehicle you will have a heavy rigid unrestricted licence. This allows you to drive any heavy rigid vehicle.
Get In Touch
At Burleigh Driver Training School, we are always here to assist you with any inquiries you may have regarding our courses, registration, and more. Our friendly customer service team is dedicated to ensuring that you have a smooth and enjoyable experience as you begin your driving career with us.
The number of lessons you will need will depend on which vehicle you plan to conduct your HR licence test in.
The expected time frames are listed below.
Heavy Rigid Licence Automatic
3 to 4 hours of training are normally required to enable you to pass the practical Heavy Vehicle Driving Test with Queensland Transport in this vehicle.
Heavy Rigid Synchromesh Manual
4 to 5 hours of training are normally required to enable you to pass the practical Heavy Vehicle Driving Test with Queensland Transport.
Heavy Rigid Road Ranger Manual (Open Licence)
10 to 12 hours of training are normally required to enable you to pass the practical Heavy Vehicle Driving Test with Queensland Transport. The final lesson will be combined with the test ensuring that you are ready to go.
According to the Queensland Department of Main Roads and Transport laws, with an HR licence you can drive the following:
To put things into perspective, gross vehicle mass (GVM) is the maximum weight that any truck can carry including its weight. GVM is set by a vehicle manufacturer and is stamped on the vehicle’s compliance plate.
To ensure that you are industry ready all our HC training in conducted in our truck with an 18 Speed Road Ranger gearbox. While being able to do full changes like all the other road ranger boxes the 18 Speed allows us to introduce you to splitting the gears. This is very beneficial when you have a heavy load and are climbing hills.
At Burleigh Driving Technical School, we provide a wide range of high-quality truck licence training depending on your needs and qualifications- at affordable prices, with no hidden fees.
